“Guide: how to avoid tangled headphones,”
“Tired of the cord tangling together? Test it here trixet”
“Skip the sladdhärvan in your pocket with this simple trick!”
“If you have brought with you a pair of headphones in your pocket, you are surely aware of their closest magical ability to get tangled up in one big tangle.”
“And even if we in the example, the use of headphones with wires, found the problem, even partially, of the wireless variant, which is not completely wireless, but have a cord behind the neck.”
“in Order to avoid this problem there are several solutions. One of the best we know is easy to remember, and allows you to easily and quickly unfold the headphones again, as if nothing had happened.”
“Join us below, and we’ll show you how!”
“Step 1: Fold the top parts”
“Start with the top two wires, i.e. those with the headphones in the ends. Fold down the headphones against huvudkabeln, so that they end up straight on the transition where it splits into the two hörlurssladdarna. “
“Then you turn kabelsamlingen a once over himself, up to the transition. If one of the wires has a volume control, try to place it so that it falls slightly below, but still overlaps with the transition.”
“Step 2: Wrap the huvudkabeln around hörlurssladdarna”
“Take hold of the actual usage, and wrapping the free portion of the cord around the gathered cables. This becomes all the more easier if you have a flat cord on the headphones, but also works well with round cords. Move your fingers down as you wrap, so that none of the wires end up outside of the ”sausage”.”
“Try to calculate virandet so that you get a small loop of all cords at the top. It should look like.”
“Step 3: Seal the braid”
“Now there only remains one thing to do, namely, to lock it so that it does not come loose. You can do this quite easily by pressing the connector through the loop. Make sure that you really get into it through all the loops, and tighten carefully.”
“Voila! Now you have a compact and trasselsäker hörlursfläta, which is just to stop down in your pocket and walk around with.”
“Step 4: Fix up the braid again.”
“To loosen up the braid again, it is the easiest of all! Simply take the plug out of the loop, and let the headset spin out themselves. A few seconds later they are ready to be used, and you can calmly and confidently let blodtrycksmedicinen and the scissors remain on the shelf – along with the aggression.nSå here it should look like:”
“however, There are a couple of things to think about. First and foremost: be sure not to tighten too hard, as this can destroy the fragile links. It is not simply to understand how all this will go to the if one of the earphones cable is shorter than the other.”
“Here it is important to keep a cool head, and improvise a little bit. Try to get hörlursproppen with the shorter cord in the correct position, and the fold then the other lead two or three times, also it sits where it should. Then you just need to ensure that they do not slide in the way before you get started with the surrandet.”
“the Article was first published by tekniksajten Tek.no.”
